Updates

recent

Xiaomi Mi Redmi Note 4 Firmware MT6797 Flash File Read Cm2 (Free)


MT6797__Xiaomi__Redmi_Note_4__nikel__6.0__alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68





1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6797
BB_CPU_NME : [MediaTek] Helio[X20]|MT6797_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer   : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GC
[eMMC] : FLASH_CID : 90014A484347346132A41C3990808313
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000E8F800000
[eMMC] : FLASH_UCP : 59640 MiB [eMMC 128 GiB]
DEV RID    : 0xE5974B4A46C016725292D3C51D52FB1A
INT RAM    : 0x00000000
EXT RAM    : 0xC0000000 [3 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Xiaomi
ProdName  : nikel
ProdModel : Redmi Note 4
Device    : nikel
AndroidVer: 6.0
MTKxCPU   : MT6797
MTKxPRJ   : alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68

[Read Ok] : preloader_lcsh6797_6c_lw_m.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : scp1.img
[Read Ok] : scp2.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6797 / V1.1.2 / lcsh6797_6c_lw_m / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3778 MiB
Scatter saved to : C:\Users\babu\Desktop\mi\MT6797__Xiaomi__Redmi_Note_4__nikel__6.0__alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68\

All done!

Done!
Elapsed: 00:05:02
Reconnect Power/Cable!

Psaaword-Redmi_Note_4_.007




Download Here
Whatsapp+IMO-00971551644035
Skype - dusto_babu


How to Flash Stock Firmware ROM (Flash File)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile


Xiaomi Mi Redmi Note 4 Firmware MT6797 Flash File Read Cm2 (Free) Reviewed by Unknown on Friday, March 24, 2017 Rating: 5

No comments:

All Rights Reserved by Mtk Firmware © 2014 - 2015
Powered By mtkfirmware, Designed by GsmMarhaba

Contact Form

Name

Email *

Message *

Powered by Blogger.