Samsung S8 Edge Clone Firmware MT6580 Flash File Read Cm2


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 17 ]
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
eMMC Flash : 90014A48384731650507000D63F4B23F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507000D63F4B23F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xF28424F5CDFB37E4BE80F10937DFE977
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G950
Device    : hero2qltechn
AndroidVer: 6.0.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1342 MiB
Scatter saved to : C:\Users\babu\Desktop\mi\MT6580__samsung__SM-G950__hero2qltechn__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\

All done!

Paid File: $2
Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile