Updates

recent

Xiaomi Redmi Note 3 Firmware MSM8952 Flash File Cm2 Read (Free)

MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3__kenzo__kenzo



Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 003E37AE
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : A0E97A58E4E3D5880943ED58CCBE5E71
ID_BLOCK_L : 06F68C2BEACDC515C2A57E691680AC11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G32
Boot Ok!


Brand     : Xiaomi
ProdName  : kenzo
ProdModel : Redmi Note 3
Device    : kenzo
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8952

DevInfo : MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3__kenzo__kenzo

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cust.img
[Read Ok] : cmnlib.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8976 / eMMC
Firmware Size : 2349 MiB

Done!
Elapsed: 00:04:58

Reconnect Power/Cable!





Password-mtkfirmware.net

How To Flash:
1. Unpack ROM and extract File.xml
2. Run InfinityBox CM2QLM
3. Power Off Phone , Remove battery , Insert back
4. PRESS and HOLD BOTH VOLUME KEYS!
5. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!"
6. During the flashing your mobile will restart automatically
7. Finish

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile
Xiaomi Redmi Note 3 Firmware MSM8952 Flash File Cm2 Read (Free) Reviewed by Unknown on Monday, September 25, 2017 Rating: 5

No comments:

All Rights Reserved by Mtk Firmware © 2014 - 2015
Powered By mtkfirmware, Designed by GsmMarhaba

Contact Form

Name

Email *

Message *

Powered by Blogger.