Updates

recent

Lenosed N7 Firmware MT6572 Flash File Read Cm2 (Free)

MT6572_NAND_N7__N7__N7__4.4.2__HS_XXD_M23_N7_V0.2_M42_0919M15


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 41 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8B00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005600AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x00A4 , [Hynix] H9DA4VH2GJMMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0x150E7FBDF353F2DC14C5B529F3894843
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_q3_m42_xingxunda_m23_lenosed_n7.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / q3_m42_xingxunda_m23_lenosed_n7 / NAND
FW Size : 341 MiB

Brand     : N7
ProdName  : N7
ProdModel : N7
Device    : N7
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HS_XXD_M23_N7_V0.2_M42_0919M15

Android Info saved

Scatter saved to : C:\Users\babu\Desktop\read\lenosed n7\MT6572_NAND_N7__N7__N7__4.4.2__HS_XXD_M23_N7_V0.2_M42_0919M15

Done!
Elapsed: 00:03:31
Reconnect Power/Cable!

Download Here


preloader_q3_m42_xingxunda_m23_lenosed_n7.bin(96.kb)

How to Flash Stock Firmware ROM (Flash File)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile
Lenosed N7 Firmware MT6572 Flash File Read Cm2 (Free) Reviewed by Mtk Firmware on Tuesday, November 28, 2017 Rating: 5
All Rights Reserved by Mtk Firmware © 2014 - 2015
Powered By mtkfirmware, Designed by GsmMarhaba

Contact Form

Name

Email *

Message *

Powered by Blogger.